Midea Cube 20-Pint Smart Dehumidifier Review (MAD20S1QWT)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Midea Cube MAD20S1QWT is a 20-pint Energy Star dehumidifier for basements, bathrooms and bedrooms up to 1,500 sq ft. Midea notes the 20 pints is on the current DOE scale and similar to 30 pints under the old 2012 DOE test, which explains why it looks small next to units rated in hot, saturated air. Its signature is the lift-and-twist design: the cube extends to run and nests down for storage, and the water tank holds 3.2 gal (12 L), about three times a typical bucket, so it runs far longer between empties. It also drains continuously through the included hose, connects to Wi-Fi for app and Alexa or Google control, sets 35-85% humidity and has auto defrost and auto restart. This look at the Cube is drawn from Midea's listing and published specs; we have not tested it.
What stands out
- Extends to run, nests for storage
- 3.2 gal (12 L) tank
- Wi-Fi, Alexa and Google Assistant
- Energy Star; 20 pints current DOE
Who it fits
Good fit for
Bedrooms, bathrooms and small basements up to 1,500 sq ft, especially where you want to empty a tank rarely or store the unit compactly in dry months.
Who should skip it
Large or very wet basements (Midea's 35- and 50-pint Cubes are the step up), and spaces that need a pump.
Verdict: A clever, low-hassle small-space dehumidifier; its 20-pint figure is a modern DOE rating, not a weak one.
Cube MAD20S1QWT specs explained
20 pints/day current DOE (about 30 pints 2012 DOE)
Measured at the cooler modern test point, so it compares well.
Up to 1,500 sq ft, 35-85% RH
A small-to-mid basement or a large bedroom.
3.2 gal / 12 L tank
Roughly three times a standard bucket.
Included drain hose
Run it over a floor drain, sink or out a door.
Wi-Fi app, Alexa, Google Assistant
Monitor and adjust from anywhere.
13.5 x 13.5 x 13.4 in (nested), 33.3 lb
Compact cube shape.
Design
A white cube that lifts and twists to its working height, then nests back to save space. The large tank sits in the base. The filter is washable, so there are no replacement filters to buy, and Midea backs it with a 1-year parts and labor warranty.
Day to day
Extend it, set your humidity in the app or on the panel, and empty the 12 L tank far less often than a typical unit, or remove the tank and use the hose. Auto restart brings it back after a power cut and auto defrost protects it in a cool basement. When the season ends, nest it and put it away.
Before you buy
Size it to the space.
Check before you buy
- Space is 1,500 sq ft or less
- Gravity drainage or tank emptying works for you
- Wi-Fi control is a plus
- You value compact storage
The product at a glance
Midea Cube 20-Pint Smart Dehumidifier
Best for: Small basements
- Moisture Removal Capacity
- 20 pints per day
- Coverage Area
- 1,500 sq ft
- Drainage Method
- 3.2 gal water tank, drain hose
- Energy Star Certification
- Energy Star
- Target Humidity Range
- 35% to 85%
- Room
- Basement
View on Amazon: Midea Cube 20-Pint Smart Dehumidifier Affiliate link
The Midea Cube MAD20S1QWT removes 20 pints a day (current DOE; about 30 under 2012 DOE) for up to 1,500 sq ft. Energy Star, lift-and-twist extendable body, 3.2 gal tank, included drain hose, 35-85% RH, Wi-Fi with Alexa and Google, auto defrost, auto restart, washable filter. 33.3 lb. 1-year warranty.
Pros
- Very large 12 L tank
- Nests for storage
- App and voice control
Cons
- No pump
- 1-year warranty only
- Small capacity for wet basements
Good fit if
- Bedrooms and bathrooms
- Small basements
Skip if
- Large wet basements
- Pump-dependent setups
Verdict: A smart compact dehumidifier with a huge tank.
Specifications side by side
| Spec | Midea Cube 20-Pint Smart Dehumidifier |
|---|---|
| Moisture Removal Capacity | 20 pints per day |
| Coverage Area | 1,500 sq ft |
| Drainage Method | 3.2 gal water tank, drain hose |
| Energy Star Certification | Energy Star |
| Target Humidity Range | 35% to 85% |
| Capacity | 20 Pint |
| Room | Basement |
| Features | Energy Star |
| Dimensions | 13.5 × 13.5 × 13.4 inches |
| Weight | 33.3 pounds |
| Size | 1,500 Sq. Ft. |
| Color | White |
| Model | MAD20S1QWT |
Frequently asked questions
Why is the Midea Cube rated only 20 pints?
It uses the current DOE test; Midea says it is similar to 30 pints under the 2012 DOE standard.
How big is the Midea Cube 20's tank?
3.2 gallons (12 L), about three times a conventional bucket.
Does it have a pump?
No. It drains into its tank or through the included hose by gravity.
What is lift and twist?
The cube extends to its full working form and nests down for compact storage.
Featured in
See also
- midea easycool maw05m1bwt 5000 btu window AC review
- midea mad22c1aws 22 pint wi fi dehumidifier review
- midea u maw06v1uwt 6000 btu inverter window AC review
- midea rmd50psaw 50 pint pump dehumidifier renewed review
- Midea Cube 50-Pint Smart Dehumidifier Review: Who It Fits and Who Should Skip It
- Midea Cube 35 Pint Dehumidifier Review: Specs, Pros and Cons
- Midea 35 Pint Smart Dehumidifier Review: Who It Fits and Who Should Skip It
- midea cube 20 pint smart dehumidifier review
- yumpie 20 review
